![]() |
|||||||
|
|||||||
![]() |
TS942IN资料 | |
![]() |
TS942IN PDF Download |
File Size : 116 KB
Manufacturer:STM Description: The TS942IN is a low skew 2/4, 4/5/6 clock generation chip designed explicitly for low skew clock generation applications. The internal dividers are synchronous to each other, therefore, the common output edges are all precisely aligned. The device can be driven by either a differential or single-ended ECL/LVECL or, if positive power supplies are used, PECL/LVPECL input signal. In addition, by using the VBB output, a sinusoidal source can be AC-coupled into the device. If a single- ended input is to be used, the VBB output should be connected to the /CLK input and bypassed to ground via a 0.01µF capacitor. The VBB output is designed to act as the switching reference for the input of the S839V under single-ended input conditions. As a result, this pin can only source/sink up to 0.5mA of current. The common enable (/EN) is synchronous so that the internal dividers will only be enabled/disabled when the internal clock is already in the LOW state. This avoids any chance of generating a runt clock pulse on the internal clock when the device is enabled/disabled as can happen with an asynchronous control. An internal runt pulse could lead to losing synchronization between the internal divider stages. The internal enable flip-flop is clocked on the falling edge of the input clock, therefore, all associated specification limits are referenced to the negative edge of the clock input. Upon start-up, the internal flip-flops will attain a random state; the master reset (MR) input must be asserted to ensure synchronization. For systems which only use one S839V, the MR pin need not be exercised as the internal divider designs ensures synchronization between the 2/4, and the 4/5/6 outputs of a single device. |
相关型号 | |
◆ AT24C02C-SSHM | |
◆ TPS22959DNYR | |
◆ ZR431F01TA | |
◆ ZMM55C5V6 | |
◆ ZJY-4P | |
◆ Z9023106PSC | |
◆ Z86L8108SSCR535HTR | |
◆ Z86E0812PSC | |
◆ Z86319 | |
◆ Z8623012SSC |
1PCS | 100PCS | 1K | 10K | ||
价 格 | |||||
型 号:TS942IN 厂 家:STM 封 装:DIP8 批 号:08+ 数 量:13000 说 明:全新原装,长期稳定供应 |
|||||
运 费: 所在地: 新旧程度: |
|||||
联系人:林小姐 |
电 话:086-755-23815997 |
手 机:13632589437 |
QQ:1097182423,2851921558 |
MSN: |
传 真:0755-23815984 |
EMail:joylin@hongbotong.com |
公司地址: 深圳市福田区深南中路3006号佳和大厦B座2007室 |