 |
|||||||
|
|||||||
|
|
|||||||
|
|||||||
|
|
| PC829资料 | |
|
PC829 PDF Download |
|
File Size : 116 KB
Manufacturer:SHARP Description:NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given in parentheses for general information only. 3. Refer to applicable symbol list. 4. The US Government preferred system of measurement is the metric SI system. However, this item was originally designed using inch-pound units of measurement. In the event of a conflict between the metric and inch-pound units, the inch-pound units shall take precedence. 5. Lead number 1 is the emitter, lead number 2 is the base, lead number 4 is omitted from this outline. The collector is number 3 and is electrically connected to the case. 6. Beyond r (radius) max, TW shall be held for a minimum length of 0.011 inch (0.28 mm). 7. TL measured from maximum HD. 8. Outline in this zone is not controlled. 9. CD shall not vary more than 0.010 inch (0.25 mm) in zone P. This zone is controlled for automatic handling. 10. Leads at gauge plane 0.054 + 0.001 - 0.000 inch (1.37 +0.03 - 0.00 mm) below seating plane shall be within 0.007 inch (0.18 mm) radius of true position (TP) at maximum material condition (MMC) relative to tab at MMC. 11. LU applies between L1 and L2. LD applies between L2 and LL minimum. Diameter is uncontrolled in L1 and beyond LL minimum. 12. All three leads. 13. r (radius) applies to both inside corners of tab. |
|
| 相关型号 | |
| ◆ AT24C02C-SSHM | |
| ◆ TPS22959DNYR | |
| ◆ ZR431F01TA | |
| ◆ ZMM55C5V6 | |
| ◆ ZJY-4P | |
| ◆ Z9023106PSC | |
| ◆ Z86L8108SSCR535HTR | |
| ◆ Z86E0812PSC | |
| ◆ Z86319 | |
| ◆ Z8623012SSC | |
| 1PCS | 100PCS | 1K | 10K | ||
| 价 格 | |||||
|
型 号：PC829 厂 家：SHARP 封 装：DIP/SOP 批 号：07+ 数 量：2000 说 明：全新库存，专业SHARP光耦供应商 |
|||||
|
运 费： 所在地： 新旧程度： |
|||||
| 联系人：林小姐 |
| 电 话：086-755-23815997 |
| 手 机：13632589437 |
| QQ：1097182423,2851921558 |
| MSN： |
| 传 真：0755-23815984 |
| EMail：joylin@hongbotong.com |
| 公司地址： 深圳市福田区深南中路3006号佳和大厦B座2007室 |
