 |
|||||||
|
|||||||
|
|
|||||||
|
|||||||
|
|
| MAX3232EWE资料 | |
|
MAX3232EWE PDF Download |
|
File Size : 116 KB
Manufacturer:MAXIM Description: For application flexibility, a CAS latency, a burst length, and a burst sequence can be programmed in the SDRAM mode register. The mode set operation must be done before any activate command after the initial power up. Any content of the mode register can be altered by re- executing the mode set command. Both banks must be in precharged state and CKE must be high at least one clock before the mode set operation. After the mode register is set, a Standby or NOP command is required. Low signals of RAS, CAS, and WE at the positive edge of the clock activate the mode set operation. Address input data at this timing defines parameters to be set as shown in the following table. |
|
| 相关型号 | |
| ◆ AT24C02C-SSHM | |
| ◆ TPS22959DNYR | |
| ◆ ZR431F01TA | |
| ◆ ZMM55C5V6 | |
| ◆ ZJY-4P | |
| ◆ Z9023106PSC | |
| ◆ Z86L8108SSCR535HTR | |
| ◆ Z86E0812PSC | |
| ◆ Z86319 | |
| ◆ Z8623012SSC | |
| 1PCS | 100PCS | 1K | 10K | ||
| 价 格 | |||||
|
型 号：MAX3232EWE 厂 家：MAXIM 封 装：SMD 批 号：09+ 数 量：4600 说 明：全新原装大量长期供应 |
|||||
|
运 费： 所在地： 新旧程度： |
|||||
| 联系人：林小姐 |
| 电 话：086-755-23815997 |
| 手 机：13632589437 |
| QQ：1097182423,2851921558 |
| MSN： |
| 传 真：0755-23815984 |
| EMail：joylin@hongbotong.com |
| 公司地址： 深圳市福田区深南中路3006号佳和大厦B座2007室 |
