联系人:
林小姐
联系电话:
086-755-23815997
点击这里给我发消息
点击这里给我发消息
首页 | 公司介绍 | 公司动态 | 产品展示 | 库存查询 | 技术资料 | 客户留言 | 在线订购 | 联系我们 |

D13079FBL18GCM

D13079FBL18GCM资料
D13079FBL18GCM
PDF Download
 
File Size : 116 KB
Manufacturer:HITACHI
Description:  The VCC supply to each optoisolator must be bypassed by a 0.1µF capacitor or larger. This can be either a ceramic or solid tantalum   capacitor with good high frequency characteristic and should be connected as close as possible to the package VCC and GND pins   of each device. 2. Each channel. 3. Enable Input - No pull up resistor required as the device has an internal pull up resistor. 4. tPLH - Propagation delay is measured from the 3.75 mA level on the HIGH to LOW transition of the input current pulse to the 1.5 V   level on the LOW to HIGH transition of the output voltage pulse. 5. tPHL - Propagation delay is measured from the 3.75 mA level on the LOW to HIGH transition of the input current pulse to the 1.5 V   level on the HIGH to LOW transition of the output voltage pulse. 6. tr - Rise time is measured from the 90% to the 10% levels on the LOW to HIGH transition of the output pulse. 7. tf - Fall time is measured from the 10% to the 90% levels on the HIGH to LOW transition of the output pulse. 8. tELH - Enable input propagation delay is measured from the 1.5 V level on the HIGH to LOW transition of the input voltage pulse   to the 1.5 V level on the LOW to HIGH transition of the output voltage pulse. 9. tEHL - Enable input propagation delay is measured from the 1.5 V level on the LOW to HIGH transition of the input voltage pulse   to the 1.5 V level on the HIGH to LOW transition of the output voltage pulse. 10. CMH - The maximum tolerable rate of rise of the common mode voltage to ensure the output will remain in the high state   (i.e., VOUT > 2.0 V). Measured in volts per microsecond (V/µs). 11. CML - The maximum tolerable rate of rise of the common mode voltage to ensure the output will remain in the low output state   (i.e., VOUT < 0.8 V). Measured in volts per microsecond (V/µs). 12. Device considered a two-terminal device: Pins 1,2,3 and 4 shorted together, and Pins 5,6,7 and 8 shorted together.
 
相关型号
◆ AT24C02C-SSHM
◆ TPS22959DNYR
◆ ZR431F01TA
◆ ZMM55C5V6
◆ ZJY-4P
◆ Z9023106PSC
◆ Z86L8108SSCR535HTR
◆ Z86E0812PSC
◆ Z86319
◆ Z8623012SSC
  1PCS 100PCS 1K 10K  
价 格  
 
 
型 号:D13079FBL18GCM
厂 家:HITACHI
封 装:QFP80
批 号:2000
数 量:2967
说 明:原装正品,长期稳定供应
 
 
运  费:
所在地:
新旧程度:
 
 
留言/订购
 
所需型号 厂家 封装 批号 数量*
 
留言
 
 
联系人/公司:
联系电话:
EMail:
验证码: * 验证码
 
 
 
 
联系我们:
联系人:林小姐
电 话:086-755-23815997
手 机:13632589437
QQ:1097182423,2851921558
MSN:
传 真:0755-23815984
EMail:joylin@hongbotong.com
公司地址: 深圳市福田区深南中路3006号佳和大厦B座2007室
订购须知: