SN74LVC1G19的技术资料

SN74LVC1G19的产品特征：
* Available in the Texas Instruments
   NanoStar™and NanoFree™Packages
* Supports 5-V V_CC Operation
* Inputs Accept Voltages to 5.5 V
* Max tpd of 4 ns at 3.3 V
* Low Power Consumption, 10-µA Max I_CC
*±24-mA Output Drive at 3.3 V
* Typical V^_OLP (Output Ground Bounce)
   <0.8 V at V_CC = 3.3 V, T_A = 25°C
* Typical V_OHV (Output VOH Undershoot)
   >2 V at V_CC = 3.3 V, T_A = 25°C
* Ioff Supports Partial-Power-Down Mode Operation
* Latch-Up Performance Exceeds 100 mA
   Per JESD 78, Class II
* ESD Protection Exceeds JESD 22
  −  2000-V Human-Body Model (A114-A)
  −  200-V Machine Model (A115-A)
  −  1000-V Charged-Device Model (C101)

SN74LVC1G19的技术参数：
Supply voltage range, V_CC. . . . . . . . .. . . . . . . . . −0.5 V to 6.5 V
Input voltage range, V_I (see Note 1) . . . . . . . . . −0.5 V to 6.5 V
Voltage range applied to any output in the high-impedance
   or power-off state, VO(see Note 1)  . . . . . . . . .−0.5 V to 6.5 V
Voltage range applied to any output in the high or low state, V_O
                  (see Notes 1 and 2) . . . . . . . . −0.5 V to V_CC + 0.5 V
Input clamp current, I_IK (V_I < 0). . . . . . . . .. . . . . . . . . . . −50 mA 
Output clamp current, I_OK (V_O < 0)  . . . . . . . . .. . . . . . . . −50 mA 
Continuous output current, I_O. . . . . . . . . . . . . .. . . . . . . .±50 mA 
Continuous current through V_CC or GND. . . . . . . . .. . . . ±100 mA 
Package thermal impedance, θ_JA (see Note 3):
                                                      DBV package . . . . . . 165°C/W  
                                                      DCK package  . . . . . .259°C/W 
                                                      YEP/YZP package  . . .123°C/W 
Storage temperature range, T_stg . . . . .. . . . . . . −65°C to 150°C


SN74LVC1G19的产品描述：

    This decoder/demultiplexer is designed for 1.65-V to 5.5-V V_CC operation.

    The SN74LVC1G19 is a 1-of-2 decoder/demultiplexer. This device buffers the data on input A and passes it to the outputs Y0 (true) and Y1 (complement) when the enable (E) input signal is low.

    This device is fully specified for partial-power-down applications using I_off. The I_off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.